Bilstein 5100 0-2.5″ lift front, 0-2″ rear shocks 00-’06 Toyota Tundra

4.00 out of 5 based on 9 customer ratings
(9 customer reviews )


Found a better price?
SKU: 00TUNBILK Categories: , , , Brand:


Bilstein 5100 Height adjustable 0-2.5″ lift front, 0-2″ rear shocks for 2000, 2001, 2002, 2003, 2004, 2005, 2006 Toyota Tundra


Bilstein front and rear shocks

24-261425 (old: 24-188265)

Front 5100 Height adjustable front shocks provide various lift:

Typical Front Lift Height**
location #
crew cab
access cab
crew cab
access cab
41.6″Do NOT use1.88″2.00″
5Do NOT useDo NOT use2.50″2.65″

On Crew Cab 4×4 models, do not use circlip location #5.
On Access Cab 4×4 models, do not use circlip locations #4 or #5.

** Ride heights indicated are typical. Actual ride height is influenced by which factory suspension the vehicle is equipped with and its condition; optional equipment and accessories on your vehicle, and other vehicle modifications such as replacement coil springs, wheel and tire combinations, etc. Modifying/lifting the suspension to your vehicle may raise its center of gravity and may make it more susceptible to loss of control and/or rollover, which may result in death or serious injury. We strongly recommend that you offset the loss of rollover resistance as much as possible by increasing tire track width, and that you equip the vehicle with a functional roll bar and cage system. Wear seat belts and shoulder harnesses at all times, and avoid situations where a side rollover may occur.

Rear 5100 shocks work with 0 to 2″ lift

Kit includes 4 shocks


9 reviews for Bilstein 5100 0-2.5″ lift front, 0-2″ rear shocks 00-’06 Toyota Tundra

  1. 5 out of 5

    (verified owner)

    The parts were delivered super quickly and exactly as I expected. I went with position 3 to get a more leveled look with the SuperSprings I have in the back for when I haul my camper. 2005 Tundra Access Cab V8 4x4.

    Was this review helpful to you? 2 of 2 people found this review helpful

  2. 5 out of 5

    My ordering process went smoothly. Communication with the company went well. I ordered one part too many and the company recognized it. They did not send the unneeded part and issued me a refund once Contacted them. I have a 04 Crew Cab Tundra 4.7L. I do all pavement pounding no off-roading. The 5100 struts in front are set at 1.06” and I also did a 1” lift block with the rear 5100s. The truck ride nicely. A little stiffer but it takes bumps and potholes so much better than before. The ride is smooth and the handling seems better. The stance of the vehicle is improved and looks very nice. I currently run 17” TRD Rock Warrior wheel with KO2 size 265.75.R17 this is a stock wheel size set up. My current set up weights pretty much what a stock set up weights so it does not put extra stress on the struts and shocks. I am very happy with this kit. If you are a pavement pounder his kit is good. I cannot speak to offroad handling. I believe these are a good investment in the ride quality of a first generation Tundra

    Was this review helpful to you? 3 of 3 people found this review helpful

  3. 2 out of 5

    Shocks came in a ripped open box with no cushioning and parts flying around the box with the shock boxes opened up

    Was this review helpful to you? 0 of 0 people found this review helpful

Add a review

Use one of the allowed file type: jpg,png.

    Questions and answers of the customers

    1. 0 votes
      A These shocks can be installed without any additional blocks, but only the front shocks are height adjustable and will lift the front by themselves.Rear shocks will not lift your truck by themselves - some lift kit options as add-a-leafs or longer coils or maybe spacers will be required for a lift. These shocks are only longer then the stock shock - designed for use with the existing lift or with stock rear height.
    2. 0 votes
      A Diff drop kt is recommended for 4WD trucks for 1.5'' of front  lift and more to increase the CV axles life.Spacers are not needed, you can use 0,5'' spacers but please note hat having more then 3'' of front lift is strictly not recommended  
    3. 0 votes
      A These springs can be used approximately 2.5″ of average lift on the bottom clip setting and 3.2″ of average lift on the 2nd clip setting.
    4. 0 votes
      A Yes, it will work even without coil spacers.Front shocsk are height adjustable and are able to lift the front up to 2.5'' higher then stock using stock front coils.Please note that it is not recommended to lift the front hightr then 3'' if trying to add spacers
    5. 0 votes
      A Coilovers with stronger coils can be recommended * * * * * * and please don't forget about diff drop kit * * *
    6. 0 votes
      A You may install bigger wheels if using some front lift shock adjustments, but if you want you may stay on your old wheels
    7. 0 votes
      A The highest notch will give you about 2,5'' - depending on your stock springs condition. Diff drop kit will be recommended if having more then 1,5'' of lift
    8. 0 votes
    9. 0 votes
      A These shocks are for Tundra - please compare the mpuntings to your old shocks:FRONT: Extended Length (IN): 18.35 Inch Compressed Length (IN): 13.23 Inch Upper Mounting Style: Stem Lower Mounting Style: EyeletREAR: Extended Length (IN): 22.4 Inch Compressed Length (IN): 13.84 Inch Rod Diameter (IN): 1.81 Inch Upper Mounting Style: Stem Lower Mounting Style: EyeletHere are the shocsk for Sequiola:
    10. 0 votes
      A Yes, it will work.As base can is lighter, each clip may give you more lift then on the access cab then on other cabs if you don't have additional front weight.
    11. 0 votes
      Answered by the admin It wont work on a 4Runner, you need, these: they provide about 2.3" lift
    12. 0 votes
    13. 0 votes
      A Sorry, we do not have Bilstein 5100 shocks for that vehicle
    14. 0 votes
      A I have a 2001 4x4 Access Cab and I have them on level 5 and haven't had any issues. I definitely got more than 3" lift in the front with them on level 5".
    15. 0 votes
    16. 0 votes
      A For front lift height 1-1,5'' no rear lift level is needed, because rear end usually sits slightly higher then the front.Using rear lift blocks or add a leaf will not level, but will make your trucks rear again sit higher then your ftont end (when the truck is not loaded).
    17. 0 votes
      A We do not guarantee any tire/ wheel fitment due to variations between different tire and wheel manufacturers specs. The new wheel size is not recommended to exceed the half of a lift amount greatly. We recommend ""test fitting"" any wheel tire/wheel combination you are considering.
    18. 0 votes
    19. 0 votes
      A Looks likeit was a delay with updating it, it is in stock now.
    20. 0 votes
      Answered by the admin

      It includes everything that is pictured. New version (that is shown & being sold now) of the front shocks comes with the boot and bushings.

    Send me a notification for each new answer.