Bilstein 2″ Lift Kit with Front Coil Options for 2016-2023 Toyota Tacoma

SKU: BK16
4.4444444444444 out of 5 based on 9 customer ratings
(9 customer reviews)

Description

Bilstein 2″ Lift Kit with Front Coil Options for 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Toyota Tacoma

Part: BK16

Includes:

  • 2 Front Bilstein 5100 shocks (Do not adjust them more than stock(lowest) settings since Eibach springs already provide 2″ of lift)
  • 2 Rear Bilstein 5100 Shocks
  • Front Eibach Springs 2″ Lift or OME
  • Rear Options: ICON 1.5″ Lift AAL or Block kit (1″ Block recommended for close to level look) or ReadyLift 1.5″ AAL or ProComp (57096B-5)
  • Diff Drop kit

Need coilover assembly?

 

Customer reviews

Rated 4.4444444444444 out of 5 stars
9 reviews

9 reviews for Bilstein 2″ Lift Kit with Front Coil Options for 2016-2023 Toyota Tacoma

Add a review

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

      Will the truck sit level with this kit?
    1. 0 votes
      Q Will the truck sit level with this kit?
      There are no answers for this question yet. Answer now
    2. Will this kit still maintain the factory rake?
    3. 0 votes
      Q Will this kit still maintain the factory rake? answer now
      A Yes, but the front shock must be properly adjusted.
    4. Looking to run 285/70R17 -12 offset ... Will this set up allow me to accomplish that
    5. 0 votes
      Q Looking to run 285/70R17 -12 offset ... Will this set up allow me to accomplish that answer now
      A These wheels will fit without rubbing: Rim* Tire Width* Tire* Backspace* 8" 12" 32" 4.5" Bigger tires may require some trimming. Also precise caster/camber adjustment and body lift may help
    6. Just ordered this kit, what wheel and tires specs do you guys recommend? Can I run a 17 inch wheel on 285/70r17 tires w out it rubbing on and off road?
    7. 0 votes
      Q Just ordered this kit, what wheel and tires specs do you guys recommend? Can I run a 17 inch whee...... Read more answer now
      A These wheels will fit without rubbing: Rim* Tire Width* Tire* Backspace* 8" 12" 32" 4.5" Bigger tires may require some trimming.  Also precise caster/camber adjustment and body lift may help
    8. What UCA is recommended for this set up?
    9. 0 votes
      Q What UCA is recommended for this set up? answer now
      A UCA's are recommended but not required, the benefit of the UCA's is to fix the caster when the vehicle is getting aligned and also helps you a lot with articulation on the front end.
    10. Hi. Don’t know much about lift kits, but interested in this. I simply need to lift 2016 Tacoma TRD Sport 4x4 for mild off road (hunting). Sometimes I will be towing a small travel trailer (4,000 lbs). Do I need the rear 1.5” options? Also I currently have 265/70R17 tires and wanting to go to little bigger. What size up can I safely go up without any modifications?
    11. 0 votes
      Q Hi. Don’t know much about lift kits, but interested in this. I simply need to lift 2016 Tacoma TR...... Read more answer now
      A Yes this set fits your truck You can choose block or 1 "or 1.5" It all depends on what height you want to get. Diff drop kit is recommended for 4WD trucks for 1.5 '' of front lift and more to increase the CV axles life. These wheels will fit without rubbing: (1.5 ' blocks) Rim* Tire Width* Tire* Backspace* 8" 12" 32" 4.5" Bigger tires may require some trimming.  Also precise caster/camber adjustment and body lift may help
    12. Will 285-75-16 tires fit without rubbing? Also, what offset wheel do you recommend-10? I have 2017 Toyota tacoma Trd Off Road 4x4. Thank you!
    13. 0 votes
      Q Will 285-75-16 tires fit without rubbing? Also, what offset wheel do you recommend-10? I have 201...... Read more answer now
      A These wheels will fit without rubbing: Rim* Tire Width* Tire* Backspace* 8" 12" 32" 4.5" Bigger tires may require some trimming.  Also precise caster/camber adjustment and body lift may help
    14. I’f I wanted to run this setup but with a add a leaf will that work? If so is the ICON add a leaf what you would recommend?
    15. 0 votes
      Q I’f I wanted to run this setup but with a add a leaf will that work? If so is the ICON add a leaf...... Read more answer now
      A I added this setup and also a 2" Toytec add a leaf. Just the shocks and springs will only lift the front 2". To lift the rear you need to add an add a leaf. The ICON should be fine.
      A I ran this lift with the icon add a leaf. Works great. Be prepared with c clamps
    16. Do I need a sway bar relocation bracket with this lift?
    17. 0 votes
      Q Do I need a sway bar relocation bracket with this lift?
      There are no answers for this question yet. Answer now
    18. Will this work with a rim size 18X9 -12 offset. Looking to put on 265/65R18s
    19. 0 votes
      Q Will this work with a rim size 18X9 -12 offset. Looking to put on 265/65R18s answer now
      A These wheels will fit without rubbing: Rim* Tire Width* Tire* Backspace* 8" 12" 32" 4.5" Bigger tires may require some trimming.  Also precise caster/camber adjustment and body lift may help
    20. Does this kit come with 886 coils? If not can I switch them to 886 and how much extra? Thanks!
    21. 0 votes
      Q Does this kit come with 886 coils? If not can I switch them to 886 and how much extra? Thanks!
      There are no answers for this question yet. Answer now
    22. I purchased and installed this kit. The front sits lower than than the rear by about 3/4". I see that you've already said a few times in this section that adjusting the spring clip to a different notch on the 5100 will "damage" the suspension, but you haven't elaborated as to how. So will you explain? Or at least tell us if a spacer or something else will be an acceptable alternative?
    23. 0 votes
      Q I purchased and installed this kit. The front sits lower than than the rear by about 3/4". I see ...... Read more answer now
      A Steering and front suspension are not designed for higher. Leverage effect will cause more than appropriate lift, it will be greater than 3/4'' rear will settle after some hundred miles, or you may use rear blocks instead of add a leafs
      A Steering and front suspension are not designed for higher. Leverage effect will cause more than appropriate lift, it will be greater than 3/4'' rear will settle after some hundred miles, or you may use rear blocks instead of add a leafs
    24. I would like to level the front of my 2019 trd off road. Which rear option would you recommend if I only desire to raise the front 2 inches and leave the rear at its current height?
    25. 0 votes
      Q I would like to level the front of my 2019 trd off road. Which rear option would you recommend if...... Read more
      There are no answers for this question yet. Answer now
    26. I see the Icon 1.5in AAL is an option with this lift kit. Will the 5100 Shocks work with the Icon AAL? I need this to hold up to moderate offroading. Thanks for the help!
    27. 0 votes
      Q I see the Icon 1.5in AAL is an option with this lift kit. Will the 5100 Shocks work with the Icon...... Read more answer now
      A yes, will work if no jumping)
    28. If your going to run 285/65 R16 are to stock upper control arms adequate or what do you recommend, as a quality upgrade?
    29. 0 votes
      Q If your going to run 285/65 R16 are to stock upper control arms adequate or what do you recommend...... Read more answer now
      A UCA's are recommended but not required, the benefit of the UCA's is to fix the caster when the vehicle is getting aligned and also helps you a lot with articulation on the front end. So Total Chaos upper control arms do require some maintenance specially on the uniball since its exposed, Pretty much once every 2 weeks the uniball needs to be cleaned with a microfiber towel and add a couple drops of Triflo lubricant otherwise clunking/squeaking sounds will come out of it. One major thing to keep in mind is that Total Chaos is a high performance UCA and everything is metal against metal so definitely weird sounds will come out of it even with proper maintenance. NOTE: This UCA's are not adjustable but the arm is designed to give the vehicle proper caster and more articulation on the front end SPC upper control arms are more designed for daily driving and tackle easy to moderate trail, also the upper ball joint is fully adjustable and regreasble as well. This SPC UCA's are pretty much maintenance free. NOTE: SPC UCA's will help to get the vehicle aligned and helps a lot with caster and camber If the client is planning on tackling really hard trails Total Chaos is a great choice or if he/she is planning on daily driving and doing easy/moderate trails SPC is the way to go  
    30. Does this come with 2, 2” add-a-leafs or just 1?
    31. 0 votes
      Q Does this come with 2, 2” add-a-leafs or just 1? answer now
      A Hi If you select the needed position in the drop-down menu, then you will receive 2, 2” add-a-leafs
      A If you select the add a leafs then you get 2 total. 1 for each side
    32. Just received my 2 in Bilstein lift,clamp rings are on the bottom nouch is this correct
    33. 0 votes
      Q Just received my 2 in Bilstein lift,clamp rings are on the bottom nouch is this correct answer now
      A Answered my own question,read upbove
      A Please send us photos of the issue and specify more clearly what is it about
    34. Are the shocks set up to accommodate for that every so famous taco lean
    35. 0 votes
      Q Are the shocks set up to accommodate for that every so famous taco lean answer now
      A Here is what you can use for lean correction *** https://www.suspensionlifts.com/shop/toyota-tacoma/2016-and-up/front-lifts-2/front-top-plate-spacer-one-14-inch/ *** if you have very small lean and no additional constant load - it can fade away with stronger coils of this lift kit
    36. I have a 2016 Toyota Tacoma TRD sport 2wd. I have a tad bit bigger tires then stock. I would like the Bilstein shocks/struts for a better ride and I would also like to add 1" overall on both front and rear in doing so, will this system work well and do I need to get the add a leaf or just a rear block?
    37. 0 votes
      Q I have a 2016 Toyota Tacoma TRD sport 2wd. I have a tad bit bigger tires then stock. I would like...... Read more answer now
      A It will work well Add a leafs are recommended for towing heavy trailers and carrying heavy loads, campers, reinforced rear bumpers etc. Add a leafs give mote than 1'' rear lift when not loaded. Rear blocks will be good for comfort if riding not fully loaded
    38. I have a 2019 Tacoma off road 4x4. Will the BILSTEIN 2" LIFT KIT WITH EIBACH COILS FOR 2016-2019 TOYOTA TACOMA and the 2" add a leaf be level or will it sit up at the rear end higher than how it sits now. If so can I have the shop go with the first or second notch on the bilstein adjustable shock to have a level lift? Or instead of the add a leaf, maybe the 1 or 2 inch block will get me the level lift? I have the kit sitting in the shopping cart now. Thank you.
    39. 0 votes
      Q I have a 2019 Tacoma off road 4x4. Will the BILSTEIN 2" LIFT KIT WITH EIBACH COILS FOR 2016-2019 ...... Read more
      There are no answers for this question yet. Answer now
    40. What is your return policy? Do I need heavier rated cois for 120 lb front bumper?
    41. 0 votes
      Q What is your return policy? Do I need heavier rated cois for 120 lb front bumper?
      There are no answers for this question yet. Answer now
    42. I am planning to install 120 lb front bumper prior getting your kit, will it compromise the dimensions/height on the front end?
    43. 0 votes
      Q I am planning to install 120 lb front bumper prior getting your kit, will it compromise the dimen...... Read more answer now
      A Definitely, the weight of the bumper will push the front end down
    44. What’s is the recommended tire size on factory 16” wheels with this kit?
    45. 0 votes
      Q What’s is the recommended tire size on factory 16” wheels with this kit? answer now
      A Maximum you can use Rim* - 8" Tire Width* - 12" Tire* - 32" Backspace* - 4.5"
    46. I just installed this kit with aal... i left front shocks at stock settings... it sits a lot lower in front and I want a more level look ... since it’s not recommended to adjust stock settings on front shocks... would adding spacers in front to level it out cause problems
    47. 0 votes
      Q I just installed this kit with aal... i left front shocks at stock settings... it sits a lot lowe...... Read more answer now
      A Hello we have additional questions for you, can you contact us https://www.suspensionlifts.com/contact-us/
      A Do not lift the front any higher than 2". 2" is the limit on what the 2016+ Tacomas can do, since they already have a 1" lift from factory totalling 3" total. Rear might settle a bit and it should get close to level
    48. Is this kit offered with everything except the coils? Already have other coils but want this kit and the AAL... thanks!
    49. 0 votes
      Q Is this kit offered with everything except the coils? Already have other coils but want this kit ...... Read more answer now
      A Yes we can do it just please put in the order details "I already have the coils - please refund the coils" and we'll refund $169
    50. Can the rear shocks be used with the 2 inch add a leaf? I thought the rear shocks can only be used with 0-1 inch of lift?
    51. 0 votes
      Q Can the rear shocks be used with the 2 inch add a leaf? I thought the rear shocks can only be use...... Read more answer now
      A

      Rear 5100s will  be good for regular ride.

       

      For heavy offroading longer BOSS shocks are recommended for better wheels articulation

    52. I purchased this kit for my 2018 TRD off road DCSB and recently installed it per the instructions. My truck sits about 3/4 of an inch lower in the front, Can i set the front to the next notch to get the front end level with the rear?
    53. 0 votes
      Q I purchased this kit for my 2018 TRD off road DCSB and recently installed it per the instructions...... Read more answer now
      A we do not recommend adjusting to a higher setting, rear might settle a bit and bring it close to level
    54. If i select 1.5 block kit on rear lift option, you ship AAL and a block kit or replace the AAL by block kit ?
    55. 0 votes
      Q If i select 1.5 block kit on rear lift option, you ship AAL and a block kit or replace the AAL by...... Read more answer now
      A Hello We will send you exactly what you choose either blocks or AAL
    56. I don’t understand the answers given above. Will a 285/70/17 tire size fit with this lift? They will be going on the oem TRD Pro black wheels. 17x7 with 4mm offset.
    57. 0 votes
      Q I don’t understand the answers given above. Will a 285/70/17 tire size fit with this lift? They w...... Read more answer now
      A These wheels will fit without rubbing: Rim* Tire Width* Tire* Backspace* 8" 12" 32" 4.5" Bigger tires may require some trimming.  Also precise caster/camber adjustment and body lift may help
    58. So are you saying to leave the adjustable rings on the front coil overs as they are when they come out of the Box?
    59. 0 votes
      Q So are you saying to leave the adjustable rings on the front coil overs as they are when they com...... Read more answer now
      A Hello You understood correctly
    60. I have a 2019 Tacoma Sr 2wd. I am looking for a simple 2 in lift to clear 265/75/16 tires and to do better on trails and slight off roading. I still want there to be a little rake I just want it to sit a little higher all together. I do not want to have to get new uca's. Will this kit be good for me?
    61. 0 votes
      Q I have a 2019 Tacoma Sr 2wd. I am looking for a simple 2 in lift to clear 265/75/16 tires and to ...... Read more answer now
      A Hello This kit fits your truck He can give you a maximum lift of 2 inches if you do not have a heavy bumper or winch. front shock can be adjusted and allows you to get various rake
      A
    62. Really like this kit but will the coils work with 3rd gen 4 cylinder?
    63. 0 votes
      Q Really like this kit but will the coils work with 3rd gen 4 cylinder? answer now
      A Yes
    64. Hello, I have a 2017 4cyl Access cab with a midrise camper shell. Will these coils be too stiff for my 2.7L AC and then will I have too much weight in the rear with the shell? Thank you.
    65. 0 votes
      Q Hello, I have a 2017 4cyl Access cab with a midrise camper shell. Will these coils be too stiff f...... Read more answer now
      A Front coils will give you about 2,5-3'' front lift, just please use the front height adjustable 5100 shocks on the lowest notch adjustment. Putting higher notches will overlift the front and can be harmful. As hor the rear - leaf springs will be good for the camper shell with additional weight carried. Diff drop kit is recommended for 4WD trucks for 1.5'' of front  lift and more to increase the CV axles life.  
    66. Are the front shocks and coils assembled on delivery?
    67. 0 votes
      Q Are the front shocks and coils assembled on delivery? answer now
      A For this kit assembled option is not offered yet
    68. I want to to the $799 Bilstein 2” lift and level to my 2017 4dr longbed Tacoma Trd off road, but don’t want the ‘block’ for leveling. Can it be done with just the aal instead of the block? Could I still get just 1” rear lift like this to level the truck? How does the all affect overall stiffness and ride? Thanks Neil
    69. 0 votes
      Q I want to to the $799 Bilstein 2” lift and level to my 2017 4dr longbed Tacoma Trd off road, but ...... Read more answer now
      A Hello, in order to figure out how much lift you need to level please take existing measurements from center of the wheel hub to the bottom of the fender. Difference between front and rear is how much lift you need to level. https://www.suspensionlifts.com/level.png Add a leafs give at least 1.5'' of tear lift or slightly more
    70. Is there an instruction kit that comes along with this?
    71. 0 votes
      Q Is there an instruction kit that comes along with this? answer now
      A As front springs give 2'' of lift, it is not recommended to set the front shocks higher than the lowest notch
    72. What is the spring rate on the eibach coils?
    73. 0 votes
      Q What is the spring rate on the eibach coils? answer now
      A It's about 10% higher than stock
    74. What is the manufactures install time for this product?
    75. 0 votes
      Q What is the manufactures install time for this product? answer now
      A about 6-8 hours
    76. When you say 1 inch factory lift. Does that include the Sr5. Or are we specifically talking TRD package? Mine is a 2016 SR5 quad cab short bed. THANKS
    77. 0 votes
      Q When you say 1 inch factory lift. Does that include the Sr5. Or are we specifically talking TRD p...... Read more answer now
      A it will fir 2016 SR5 quad cab giving additionally 2'' of front lift
    78. I have a 2017 tacoma sr5 4x4. will i be able to put 275/70R17 on it without any rubbing?
    79. 0 votes
      Q I have a 2017 tacoma sr5 4x4. will i be able to put 275/70R17 on it without any rubbing? answer now
      A Rim* Tire Width* Tire* Backspace* 8" 12" 32" 4.5" Such wheels will fit without rubbing, bigger tires can require some trimming. Also precise caster/camber adjustment may help. Wheel spacers are sometimes used. Body lift kit helps to accommodate bigger tires.
    80. Do I need new u bolts to instal the real AAL springs
    81. 0 votes
      Q Do I need new u bolts to instal the real AAL springs answer now
      A Stock u-bolts are good for AALs. Longer u-bolts are needed for blocks
    82. Does this lift require UCAs, I have a 2016 SR5 4x4?
    83. 0 votes
      Q Does this lift require UCAs, I have a 2016 SR5 4x4? answer now
      A UCA's are recommended but not require, the benefit of the UCA's is to fix the caster when the vehicle is getting aligned and also helps you a lot with articulation on the front end.
    84. I'm looking to lift my truck and add some wheels and tires. Will this kit allow my truck to be basically 3" lift and leveled?
    85. 0 votes
      Q I'm looking to lift my truck and add some wheels and tires. Will this kit allow my truck to be ba...... Read more answer now
      A Hello No, this set is designed for lifting and leveling at 2 inches (Bilstein 2″ Lift Kit ) At 3 inches, we can offer you other kits, but they are more expensive. https://www.suspensionlifts.com/shop/toyota-tacoma/2016-and-up/2016-lift-kits/revtek-0-3-adjustable-lift-kit-for-2016-2018-toyota-tacoma/ https://www.suspensionlifts.com/shop/toyota-tacoma/0-2-75-lift-kit-stage-2-icon-2016-toyota-tacoma/ https://www.suspensionlifts.com/shop/toyota-tacoma/icon-0-2-75-lift-kit-stage-3-wtubular-uca-2016-2017-toyota-tacoma/
    86. If I want to level the truck and use this kit, what else do I need?
    87. 0 votes
      Q If I want to level the truck and use this kit, what else do I need? answer now
      A Hello, in order to figure out how much lift you need to level please take existing measurements from center of the wheel hub to the bottom of the fender. Difference between front and rear is how much lift you need to level. http://prntscr.com/gfgxwt
    88. Does the 1" block kit replace the add a leaf, or is that in addition to it? I'm assuming that the kit with the add a leaf doesn't level the truck, so I was looking for just a 1" block in the rear to level it.
    89. 0 votes
      Q Does the 1" block kit replace the add a leaf, or is that in addition to it? I'm assuming that the...... Read more answer now
      A 1'' bloc replaces add a leaf. You are right, 1'' block is better for leveling
    90. How do they eibach coils compare to the oem coils?
    91. 0 votes
      Q How do they eibach coils compare to the oem coils? answer now
      A Eibach coils give 2'' front lift to stock weight trucks. They have approximately 10% higher spring rate than stock coils.
    92. When you say "Do not adjust" do you mean that it is not needed or that it will damage the coils?
    93. 0 votes
      Q When you say "Do not adjust" do you mean that it is not needed or that it will damage the coils? answer now
      A It will overlift the truck and will damage the suspension
    94. Will this clear a 33inch tire without any rubbing nor wheel spacers? 2017 Trd 4x4 sport
    95. 0 votes
      Q Will this clear a 33inch tire without any rubbing nor wheel spacers? 2017 Trd 4x4 sport answer now
      A Lift Size Rim* Tire Width* Tire* Backspace* 3" / 1.5" 8" 12" 32" 4.5" such tires will fit without rubbing, bigger tires will require some trimming. Also precise castercamber adjustment may help
    96. Will this clear 285/70/17s on a 2018 Tacoma trd off-road 2wd
    97. 0 votes
      Q Will this clear 285/70/17s on a 2018 Tacoma trd off-road 2wd answer now
      A Such tires will fit without rubbing Rim* Tire Width* Tire* Backspace* 8" 12" 32" 4.5" Bigger tires may require some trimming or wheel spacers. Also precise castercamber adjustment may help
    98. 2019 Toyota Tacoma TRD Sport 4x4 Long bed (6.2” Long bed) – Q. With regard to this specific lift Kit listed (SKU # BX16 / PART # BX16): Will there be any problems adjusting the Front Bilstein 5100 Struts up a little bit to add about an additional 1” to the already 2” Front Eibach Coil Spring’s height to obtain a total additional Front End Lift of 3” total for my Toyota Tacoma?
    99. 0 votes
      Q 2019 Toyota Tacoma TRD Sport 4x4 Long bed (6.2” Long bed) – Q. With regard to this specific lift ...... Read more answer now
      A 2016+ Tacomas are already lifted 1'' from the factory so no more then 2'' additional lift is recommended. Lifting more can be harmful
    100. Anyway to make this kit a 3” lift? This is exactly what I am looking for but in a 3” lift
    101. 0 votes
      Q Anyway to make this kit a 3” lift? This is exactly what I am looking for but in a 3” lift answer now
      A As 3rd gen (2016-2019) Tacomas arenalready lifted 1''mfrom the factory this kit will give them 2'' additional lift

    Send me a notification for each new answer.

    -

    Base Price; $1,015.79

    In stock

    In stock

    • Coils already provide lift and front shocks need to be installed on the lowest/bottom setting.
    • Please scroll to the bottom of the page to find a link to a kit with coilovers assembled.