ReadyLift 2.25″ Leveling Kit for 2005-2019 Toyota Tacoma 4WD/2WD

$229.95

Found a better price?

Description

ReadyLift 2.25″ Leveling Kit for 2005-2019 Toyota Tacoma 4WD/2WD Prerunner without Xreas

Sku: 66-5055

FOR 2016-17 MODEL TACOMA’S UNTIL FURTHER NOTICE. Some 2016 Tacoma’s may experience a deceleration vibration. If your truck has the “Crawl Feature” transfercase and only has a 1″ stock rake between front and rear, you can use the kit but do not use the differential drop spacers. 

ReadyLIFT® leveling kits are the fastest, safest, least expensive way to bring the front of your vehicle level with the rear. Our innovative Smart Strut Technology mounts on top of the strut assembly, eliminating the hassle, time and danger of compressing springs. ReadyLift® steel strut extension will maintain a smooth OEM ride without adding pressure to stock suspension components, guaranteed!

The 66-5055 strut extension provides 2.25” of lift which gives clearance to add up to 32” wheels and tires to the 2005-2019 Toyota Tacoma 2wd & 4wd and PreRunner. 33′ tires can be used with some minor trimming of the inner fender panel.

NOTE: 2011-2016 Tacoma applications: Toyota made minor changes to the Tacoma upper control arm suspension geometry. In some cases adding a leveling kit MAY affect the ability to correct the caster alignment to within factory specifications. If you have a 2011-2014 Tacoma with a leveling kit and the caster alignment specs cannot be put back to factory your truck will require an aftermarket upper control arm with adjustable caster/camber.

* NOTE: 2013-UP Tacoma TRD models require purchase of Sway Bar Relocation bracket.

Installation is simple and requires no strut preloading, cutting, or modification of factory installed parts. While other kits cost thousands to buy and hours to install, ReadyLIFT® can be installed one to two hours and costs less than the price of a single custom wheel.

ReadyLIFT® Lifetime Warranty Included! All ReadyLIFT® products are backed by a lifetime warranty for as long as you own your vehicle and includes all necessary parts, hardware, detailed installation instructions, and two color decals.

Note: It is ReadyLift’s position that our objective is to provide a product that levels the vehicle. Through on-going research we have discovered that Toyota trucks have a unique pattern of being manufactured and sold with varying degrees of rear to front rake. It appears that many Toyota trucks are not the same height or possess the same rake as the same stock truck sitting next to it. Our research has determined there can be as much as 1.0” difference in rake and ride height from truck to truck. TRD-equipped trucks often have only 1.0” of rake compared to a non-TRD truck. Measurements on some customer’s trucks have revealed as much as 1.0” difference in the factory front end height.

If you measure the truck at stock height, then install a 3” strut extension and determine after installation and alignment that the truck sits nose high, you most likely are an owner of one of the trucks that has less rear to front rake. To compensate for the difference, ReadyLift suggests installing one of our 1.0” (66-5001) Rear Block Kits to achieve a slight rake to a level stance.

ReadyLIFT® Features

  • Keeps your factory ride – Guaranteed
  • Will never wear, break or fail – Guaranteed
  • Toughest finish – Guaranteed
  • Safest way to level lift – GuaranteedSmartest Strut Extensions Available

    ReadyLIFT® Top Mount Strut Extension

  • Safely installs without compressing struts
  • Fixed Lift
  • 10.9 rated mounting studs
  • Powder coated – Solid steel construction
  • Made from 7mm plate steel (over 1/4″ thick)Notes:
    • 33″ Tires will only work using an OEM wheel or OEM wheel-equivilant backspaced wheel. Some minor trimming may be required.
    • Some applications may require 1″ rear block kit Part# 66-5001

    Also Available–ReadyLift Tacoma 1″ Rear Block Kits
    ReadyLIFT® OEM style rear block kits are now available for 2005-2013 Tacoma six-lug model applications. These Rear Block Kits include (2) Rear Blocks, (4) E-Coated U-Bolts, (8) Nuts and Washers and will safely lift the rear of your Truck an additional 1”. Based on OEM designs and made from cast iron, never made out of light weight extrusions.  ReadyLift® Block Kits will put a slight rake back in your Truck for hauling or towing and are designed to work in concert with your ReadyLift® Suspension Leveling Kit. This is a great Tow Package upgrade that allows you to fully lift your truck while maintaining the use it like it was originally intended. Like all ReadyLift® products these block kits come with our Lifetime Warranty.

Tire Fitment:

33″ Maximum tire diameter

33×11.50 for no rub on a 9″ wide wheel with +6 offset

17″ – 295/70R17

18″ – 295/65R18

20″ – 285/60R20

22″ – 285/50R22

Customers' review

5 stars 0 0 %
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

Reviews

There are no reviews yet.

Be the first to review “ReadyLift 2.25″ Leveling Kit for 2005-2019 Toyota Tacoma 4WD/2WD”

Use one of the allowed file type: jpg,png.

    Questions and answers of the customers

    1. A It is recommended to install front diff drop kit to lower the possible vibrations after lift . https://bilsteinlifts.com/shop/toyota-fj-cruiser/toyota-fj-cruiser-2010-2011-2012-2013/front-lifts/front-differential-drop-kit/
    2. A You are right, diff drop lit i always not the bad idea when the lift is more then 1-1,5''

    Send me a notification for each new answer.
    ATTENTION STATE OF CALIFORNIA CONSUMERS. WARNING: Cancer and reproductive harm – www.p65warnings.ca.gov