Revtek 2.5" Lift Kit for 2008-2014 Toyota Sequoia
Revtek 2.5" Lift Kit on 2012 Toyota SequoiaRevtek 2.5" Lift Kit on 2012 Toyota Sequoia sideRevtek 2.5" Lift Kit on 2012 Toyota Sequoia backCustomer's vehicle with P285/65R18 tiresCustomer's vehicle with P285/65R18 tires

Revtek 2.5″ Lift Kit for 2008-2015 Toyota Sequoia

5 out of 5 based on 1 customer rating
(1 customer review)


Found a better price?
SKU: REV441 Categories: , Brands: .

Product Description

Revtek 2.5″ Lift Kit / Suspension System for 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 Toyota Sequoia

Stock: REV441


  • Virtually indestructible specialty polymer or polyurethane rear spacers
  • System will achieve 2.5″ lift in the front and 1.5″ lift in the rear to level the vehicle
  • Does not require replacement shocks
  • Same proven front lift design as the Tacoma and Tundra kits
  • Based on our proven split spacer design
  • Kit will allow for tires up to 35″ with minor wheel well trimming
  • Maintains standard Toyota OEM geometry
  • No cutting or welding necessary
  • No modification of original steering components necessary
  • Easy installation, takes only 3-4 hours
  • Made in the USA
  • Note: Will NOT work on Platinum or vehicles equipped with rear air suspension

1 review for Revtek 2.5″ Lift Kit for 2008-2015 Toyota Sequoia

  1. 5 out of 5


    The Sequoia with the lime green inserts on the wheels is my 2008. I’ve had the kit on for about 3 years and have had no concerns at all. Ride quality is fine and the 295/55/r20 tires have never rubbed. Kit installs in about 4 or 5 hours.

Add a review

Q: can you tell me what size tires and wheels are on the sequoia you are showing?
— Asked by Joshua L Wallach on July 18, 2014
A: 33 11.50s
— http://admin
Q: Is it possible to install both, Revtek 2.5" and Air LiftAirBag 1000 lbs in the rear suspension ?
— Asked by Thierry on October 8, 2014
A: If it is in addition to the Revtek, it should be physically possible because all we do in the rear is add a poly spacer to the top of the coil spring. It would matter where the air bags were mounted. If they were installed on the axle, they would need some kind of extension to lift them up the extra 2” to accommodate for the lift.
— http://admin
Q: Do I need to get the differential drop kit if i install revtek 441 on my 08 sequoia?
— Asked by Brandon on June 22, 2015
A: The 441 comes with a diff drop kit.
— http://admin
Q: Dose the kit fit on 2011 Sequoia platinum
— Asked by khaled on December 4, 2014
A: No.
— http://admin
Q: Does this kit will fit on 2008 Seqouia Limited 4x4.
— Asked by jerrold on March 13, 2016
A: Yes
— http://admin

Have a Question? Submit it here!