Bilstein 5100 0-2.75″ Front 0-1″ Rear Lift Shocks 2011-2018 RAM 1500 4WD

SKU: 3cbfd3489c42
4.875 out of 5 based on 16 customer ratings
(16 customer reviews)
Sale!

Description

2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 RAM 1500 4WD Bilstein 5100 0-2.75″ Front & 0-1″ Rear Lift Shocks

Need it assembled?

Front Shocks:

Series: 5100

Front Extended Length(in): 21.4

Front Collapsed Length(in): 15.12

Part Number: 24-317887

Front 24-187367 shocks installation manual

Rear Shocks:

Series: 5100

Rear Extended Length(in): 26.73

Rear Collapsed Length(in): 16.75

Part Number: 24-187374

Rear Shocks Fitment Notes:

 

Fitment: 11-’18 RAM 1500 4WD Bilstein 5100 0-2.75″ Front & 0-1″ Rear Lift Shocks

Important fitment notes:  

Rear shocks will not lift your truck by themselves.

Need 1″ Bilstein rear coils?


Includes 4 Shocks

Customer reviews

Rated 4.875 out of 5 stars
16 reviews
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

16 reviews for Bilstein 5100 0-2.75″ Front 0-1″ Rear Lift Shocks 2011-2018 RAM 1500 4WD

Add a review

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

      Will these work with existing 6” lift on ram1500 4wd 2016?
    1. 0 votes
      Q Will these work with existing 6” lift on ram1500 4wd 2016? answer now
      A front can work  in case your kit uses stock front shocks rears will be too short
    2. If I get the rear shocks I will need the coils as well?
    3. 0 votes
      Q If I get the rear shocks I will need the coils as well? answer now
      A you can use rear shocks with OEM stock height coils 
    4. Will these work with ready lift sst 4" it's time for new tires and I have a bad front strut. Figured I'll do a lift bigger tires 2011 Ram 1500 slt.
    5. 0 votes
      Q Will these work with ready lift sst 4" it's time for new tires and I have a bad front strut. Figu...... Read more answer now
      A will work if you use stock height front shocks with your kit
    6. Will this kit work on a 2017 Ram 1500 Laramie Crew Cab 4x4 Ecodiesel? Also at the 2.1 setting would I need to replace my upper control arms?
    7. 0 votes
      Q Will this kit work on a 2017 Ram 1500 Laramie Crew Cab 4x4 Ecodiesel? Also at the 2.1 setting wou...... Read more answer now
      A yes will work UCA's are recommended but not required, the benefit of the UCA's is to fix the caster when the vehicle is getting aligned and also helps you a lot with articulation on the front end.
    8. Hello. I have a 2020 Ram Classic 4wd. Will these fit??
    9. 0 votes
      Q Hello. I have a 2020 Ram Classic 4wd. Will these fit?? answer now
      A They work. No problemo and you'll love the ride. A little more rigid of a ride, but it is a truck.
      A If you have 2020 Ram 1500 Classic  4WD  Front:Coil Rear:Coil shocks will fit Position: Front Notes: -Front Lift Height: 0-2.75" Position: Rear Notes: -For Rear Lifted Height: 0-1"
    10. Is this the right set for 2019 classic
    11. 0 votes
      Q Is this the right set for 2019 classic answer now
      A yes will fit 2019 Ram 1500 classic if it's 4wd
    12. 2019 Ram 1500 classic Warlock has 1 inch lift from factory. Will I achieve a 2.75 lift in the frt or just a 1.75 as it looks the strut is how factory achieved the 1 inch?
    13. 0 votes
      Q 2019 Ram 1500 classic Warlock has 1 inch lift from factory. Will I achieve a 2.75 lift in the frt...... Read more answer now
      A you'll get additional 1,75'' if already lifted 1'' 
    14. I have 2018 ram 1500. I’m assuming these are adjustable up to 2.75”? Also can I use stock spring for fronts and do I need upper control arms as well?
    15. 0 votes
      Q I have 2018 ram 1500. I’m assuming these are adjustable up to 2.75”? Also can I use stock spring ...... Read more answer now
      A It will fit for 11-2018 RAM 1500 4WD. Everything is correct. The front shocks can be used with a stock spring and set to a maximum height of 2.75 ″ Installation Instructions https://productdesk.cart.bilsteinus.com//media/products/bilstein/E4-WM5-Y352A00.pdf You don't need a new upper control arms for this shock
    16. If this kit says the rear shocks are for a 0-1" lift, but below the kit there is a recommendation that I need the 1.5" springs for the rear shocks... What springs do I need if I'd like to lift the rear 1"?
    17. 0 votes
      Q If this kit says the rear shocks are for a 0-1" lift, but below the kit there is a recommendation...... Read more answer now
      A unfortunately we don't have 1'' rear coils - you can use any 1'' rear coils or spacers
    18. Afternoon, I have a 2014 Ram with a 2 1/2" leveling kit. Can I put the 5100 shocks on the front with the other? Will it lift my truck an additional 2 plus inches? For everyone's information , with my front lift above I have 35", 12.5 wide Nittros on stock 9 1/2" rims and the tires DO NOT HIT ANYWHERE!
    19. 0 votes
      Q Afternoon, I have a 2014 Ram with a 2 1/2" leveling kit. Can I put the 5100 shocks on the front w...... Read more answer now
      A It can give slight additional lift but it is not recommended to stack lifts
    20. i have a 2010 Ram 1500 ext cab 4wd. what setting should i set the front struts at? stock suspension currently
    21. 0 votes
      Q i have a 2010 Ram 1500 ext cab 4wd. what setting should i set the front struts at? stock suspensi...... Read more answer now
      A I have a 2015 Dodge Ram 1500 And I adjusted the front lift all the way and Just changed the back Shocks with all stock equipment... My Truck now accepts 34 1/2" tires without Rubbing on the Rugged Mountain Runs to the Gold Mine in Liberty Washington... I still stop and do a little road repair when I have My Mining Tools with Me!!! In Liberty We use a pick and Shovel to extract the Wire Gold!!! I Love My Dodge Ram 1500 But three exhaust bolts broke within 5,000 miles of Each other and there is No recall on obviously Inferior Exhaust Studs... Hmmm... The Dodge Dealership informed Me I have Exhaust bolts broken on both Manifolds??? Obviously inferior Strength Studs where used to save a few bucks that ends up costing the consumer!!! Well at Least I have Bad Ass Bilstein Shocks that Ride fantasticly on Rugged Terain!!! Peace and Adjust them Bilstein Shocks to Two inches if You want Your Truck Level from stock!!! I went all the Way and like the 3/4" extra height in the front!!! It looks Tough!!! These Bilstein Adjustable Shocks are the Shiznitz!!!
    22. If I install these and don't like the ride, can I return them?
    23. 0 votes
      Q If I install these and don't like the ride, can I return them?
      There are no answers for this question yet. Answer now
    24. I installed air-lift bags in the rear of my truck for towing a trailer. I can't see how that would interfere with this kit. I only want to level the truck and leave rear height alone but I also need rear shocks so I was thinking about getting this kit. can anybody see a problem with this?
    25. 0 votes
      Q I installed air-lift bags in the rear of my truck for towing a trailer. I can't see how that woul...... Read more answer now
      A you can use aftermarket airbags no problem. We just wanted to inform that these shocks are not for factory air suspension
    26. Is this the same setup for the 4” super lift for 2015 ram 1500?
    27. 0 votes
      Q Is this the same setup for the 4” super lift for 2015 ram 1500? answer now
      A only in case the kit uses stock height shocks
    28. Will these for a 2010 TRX 4x4 model?
    29. 0 votes
      Q Will these for a 2010 TRX 4x4 model? answer now
      A yes, it will fit TRX4
    30. Would these be the shocks that the lift kit from mopar includes? I have a 2014 ram 1500 outdoorsman
    31. 0 votes
      Q Would these be the shocks that the lift kit from mopar includes? I have a 2014 ram 1500 outdoorsman answer now
      A Yes, these will be good
    32. How much or the 1" spacers to lift the rear of the truck. Thinking about buying the shocks 5100 series. With the front and rear shocks but says need spacers cuz it wont lift the rear without
    33. 0 votes
      Q How much or the 1" spacers to lift the rear of the truck. Thinking about buying the shocks 5100 s...... Read more answer now
      A You may stay at stock rear height or use something for rear lift such as https://www.suspensionlifts.com/shop/dodge/09-12-dodge-ram-1500/2009-2010/rear-lifts-2009-2010/icon-1-5-lift-rear-coil-springs-2009-2017-dodge-ram-1500/ https://www.suspensionlifts.com/shop/dodge/09-12-dodge-ram-1500/2009-2010/rear-lifts-2009-2010/bilstein-b12-1-5-rear-lift-coils-for-2009-2019-ram-1500/
    34. What is the reason 5100 are not recommended for the 2005 Dodge Ram 1500. I know they have the torsion bar front suspension, if the front is cranked up to provide 1-2 inches of lift....will 5100's work?
    35. 0 votes
      Q What is the reason 5100 are not recommended for the 2005 Dodge Ram 1500. I know they have the tor...... Read more answer now
      A 2005 just has different suspension and other shock length
    36. What if my shocks have been replaced before and no longer have factory front spring seats? Do you offer a spring seat?
    37. 0 votes
      Q What if my shocks have been replaced before and no longer have factory front spring seats? Do you...... Read more
      There are no answers for this question yet. Answer now
    38. Anything for the new 2019 ram 1500
    39. 0 votes
      Q Anything for the new 2019 ram 1500 answer now
      A Not yet unfortunately
    40. I have a 2018 4WD Ram 1500 without air suspension, Do I need to have 18"+ wheels or will the stock 17" wheels fine?
    41. 0 votes
      Q I have a 2018 4WD Ram 1500 without air suspension, Do I need to have 18"+ wheels or will the stoc...... Read more answer now
      A Such wheels will fit without rubbing: Rim* Tire Width* Tire* Backspace* 2" 9" 12.5" 35" 5" Bigger tires may require some trimming.  Also precise caster/camber adjustment and body lift may help
    42. I have a 2014 ram 1500 4x4 sport, how is the ride quality with these set at 2.75" with stock coils? is this a better way to lift the ram than using the spacers? currently looking at a 3" spacer for front, 1" for rear, but want the best ride I can find. Also what UCAs would you recommend?
    43. 0 votes
      Q I have a 2014 ram 1500 4x4 sport, how is the ride quality with these set at 2.75" with stock coil...... Read more answer now
      A UCA's are recommended but not required, the benefit of the UCA's is to fix the caster when the vehicle is getting aligned and also helps you a lot with articulation on the front end. Ride quality feelings are pretty subjective, as for road handling it will better than with spacers because spacers decrease wheel travel
    44. dose the rear shocks will fit with the icon 1.5" rear lift ? on ram 1500 2011 longhorn
    45. 0 votes
      Q dose the rear shocks will fit with the icon 1.5" rear lift ? on ram 1500 2011 longhorn answer now
      A Yes, it may fit but not higher
    46. How does the adjustment on the front shocks increase ride height? And does increasing the ride height setting on the shocks make them stiffer?
    47. 0 votes
      Q How does the adjustment on the front shocks increase ride height? And does increasing the ride he...... Read more answer now
      A Hello Ride height is increased by moving coil ring to the higher position
    48. If I have 3" Rough Country lift installed and later decide to add these Bilstein 5100's, would adding the Bilsteins set at 2.1" (at lowest setting) give me an overall front height of 5"? I understand it's not recommended to stack lifts, just trying to learn how to do this. All of my local shops charge in the $2300 range for a 4" lift to be installed. Thanks!
    49. 0 votes
      Q If I have 3" Rough Country lift installed and later decide to add these Bilstein 5100's, would ad...... Read more answer now
      A They are right, for more than 3'' you need much more parts and work, or suspension damage will occur
    50. I have 2014 RAM 1500 Crew Cab Laramie. If I install the 5100's at 2.5" (front), can I add a 1.5" lift with UCA's to get to a total 4" of lift? I've decided on these 5100's, I'm just trying to find the most practical way to raise it for a total of 4" of lift. With that said, I'll likely add a 1" spacer to the back to ensure it is level or just slightly higher in the back. Thanks
    51. 0 votes
      Q I have 2014 RAM 1500 Crew Cab Laramie. If I install the 5100's at 2.5" (front), can I add a 1.5" ...... Read more answer now
      A It is not recommended to stack lifts. Hello, in order to figure out how much lift you need to level please take existing measurements from center of the wheel hub to the bottom of the fender. Difference between front and rear is how much lift you need to level. https://prntscr.com/gfgxwt
    52. I have a 2015 Ram 1500 with after market air suspension by Timber Grove Enterprises that fit where OEM bump stops install. Will this kit fit?
    53. 0 votes
      Q I have a 2015 Ram 1500 with after market air suspension by Timber Grove Enterprises that fit wher...... Read more answer now
      A It will fir if you have air helper airbags. If you have air springs instead of standard coil springs - you need to compare shocks characteristics to your old shocks
    54. Will these fit 2019 Ram 1500 4WD?
    55. 0 votes
      Q Will these fit 2019 Ram 1500 4WD? answer now
      A Will fit only 2019 Ram classic (same body as 2011-2018)
    56. Can the front 5100 be adjusted once installed or do they have to be dismantled ?
    57. 0 votes
      Q Can the front 5100 be adjusted once installed or do they have to be dismantled ? answer now
      A It is to be disassembled https://suspensionlifts.com/wp-content/uploads/2015/10/E4-WM5-Y352A00.pdf
    58. Hi there, I have a 2019 Ram 2x4 6.5 bed crew cab, stock. Will these fit the 2019? Any additional parts required?
    59. 0 votes
      Q Hi there, I have a 2019 Ram 2x4 6.5 bed crew cab, stock. Will these fit the 2019? Any additional ...... Read more answer now
      A Unfortunately no, it's for 4WD
    60. Assuming stock suspension parts are functioning fine, if I purchase these shocks, are there any other parts needed for instillation?
    61. 0 votes
      Q Assuming stock suspension parts are functioning fine, if I purchase these shocks, are there any o...... Read more answer now
      A Front shocks are height adjustable and will lift the front end using stock coils. Rear shocks are longer then stock but rear will remain stock height without rear lift springs installed
    62. what size rim and tire can i got up to if i go up the full amount on front and back
    63. 0 votes
      Q what size rim and tire can i got up to if i go up the full amount on front and back answer now
      A up to 34'' tire - rubbing will depend on backspacing. We always recommend tire test fitment first
    64. 2013 ram 1500 4 wheel drive. can i use my stock springs and the seat for it? Do i need a spacer for the rear 1 inch lift and and is there anything else i will need to buy to complete the project?
    65. 0 votes
      Q 2013 ram 1500 4 wheel drive. can i use my stock springs and the seat for it? Do i need a spacer f...... Read more answer now
      A You are right: fronts are for stock coils, rears can be used with 1'' spacer
    66. Is it recommended to replace upper control arm when installing these to the max 2.8” setting
    67. 0 votes
      Q Is it recommended to replace upper control arm when installing these to the max 2.8” setting answer now
      A UCA's are recommended but not require, the benefit of the UCA's is to  fix the caster when the vehicle is getting aligned and also helps you a  lot with articulation on the front end.
    68. I have a 2017 ram 1500 quad 4x4. with this kit and 1" spacer (to level/slight lift) do I also need replacement upper control arms?
    69. 0 votes
      Q I have a 2017 ram 1500 quad 4x4. with this kit and 1" spacer (to level/slight lift) do I also nee...... Read more answer now
      A UCA's are recommended but not require, the benefit of the UCA's is to  fix the caster when the vehicle is getting aligned and also helps you a  lot with articulation on the front end. Front shocks are height adjustable - the spacer can be needed only for rear
    70. What brand and material of spacers do y’all recommend? And what setting would best work for a safe 3 inches in the front?
    71. 0 votes
      Q What brand and material of spacers do y’all recommend? And what setting would best work for a saf...... Read more answer now
      A Highest setting will provide up to 2.75'' of lift - maybe no spacers will be needed
    72. Would 4” spacers in front along with upgraded Front UCA’s and 2” spacers in rear be alright with these shocks?
    73. 0 votes
      Q Would 4” spacers in front along with upgraded Front UCA’s and 2” spacers in rear be alright with ...... Read more answer now
      A It is not recommended to stack lifts - can cause suspension harm
    74. Will the stock coils fit into these? On a 2015 Ram 1500 4wd crew cab
    75. 0 votes
      Q Will the stock coils fit into these? On a 2015 Ram 1500 4wd crew cab answer now
      A Yes, stock coils will fit
    76. With a rough country 3inch no cut lift, will these work as a good replacement from the stock shocks? Not sure if y’all are familiar with that lift kit but it’s a 1” coil spacer in rear and 3”inch strut spacers in the front along with better angled tubular UCA’s.
    77. 0 votes
      Q With a rough country 3inch no cut lift, will these work as a good replacement from the stock shoc...... Read more answer now
      A These shocks may fit - please compare your old shocks lengths and mountings to these FRONT: Extended Length (IN): 21.4 Inch Compressed Length (IN): 15.12 Inch Upper Mounting Style: Pin Lower Mounting Style: Eyelet REAR: Extended Length (IN): 26.73 Inch Compressed Length (IN): 16-3/4 Inch Rod Diameter (IN): 1.81 Inch Upper Mounting Style: Eyelet Lower Mounting Style: Eyelet
    78. Why would I need a rear 1inch spacer?
    79. 0 votes
      Q Why would I need a rear 1inch spacer? answer now
      A Not exactly need, just please note, rear shocks will not lift your truck by themselves - some lift kit options as add-a-leafs or longer coils or maybe spacers will be required for a lift. Rear shocks are only longer then the stock shock - designed for use with the existing 1'' lift or may be used with 0'' rear lift (stock height)
    80. Do you need an alignment after installation?
    81. 0 votes
      Q Do you need an alignment after installation? answer now
      A Alignment is needed especially for the front - using height adjustable shocks allow to lift the front end
    82. Will these fit a 2011 ram 1500 with 6 inch lift? Was told the rear shocks are too short.
    83. 0 votes
      Q Will these fit a 2011 ram 1500 with 6 inch lift? Was told the rear shocks are too short. answer now
      A For 2011 Ram 4WD we can't offer longer Bilstein shocks. We can offer Skyjacker Mono premium series shocks for 6'' rear lift: * * * Extended Length (IN): 28.59 Inch Compressed Length (IN): 16.7 Inch Upper Mounting Style: Eyelet Lower Mounting Style: Eyelet * * * will it be good?
    84. Does running at full extension require replacement of UCA? If so what is the recommended replacement UCA?
    85. 0 votes
      Q Does running at full extension require replacement of UCA? If so what is the recommended replacem...... Read more answer now
      A UCAs are always not a bad idea, but the lifts up to 3'' can go without UCAs. UCA's are recommended but not require, the benefit of the UCA's is to  fix the caster when the vehicle is getting aligned and also helps you a  lot with articulation on the front end.
    86. I'm curious if this will work on a 2018 Ram 1500 4x4. Plan on setting the front to 2.75" and using the daystar 1" coil lift spacer on the rear. My understanding is nothing has changed from the 17' - 18' model but i just wanted to confirm.
    87. 0 votes
      Q I'm curious if this will work on a 2018 Ram 1500 4x4. Plan on setting the front to 2.75" and usin...... Read more answer now
      A You are right, they will fit the 1500 Ram 4WD with coil spring suspension
    88. I ordered this lift for my 2016 ram 1500 big horn 4x4. I plan on keeping my factory 20” rims and setting the lift at 2.5”. Do I need wheel spacers for this lift as some others I was researching said you do?
    89. 0 votes
      Q I ordered this lift for my 2016 ram 1500 big horn 4x4. I plan on keeping my factory 20” rims and ...... Read more answer now
      A Wheel spacers are not needed - factory rims can be kept. Coil spacer will be needed for the rear lift - the rear shocks are just longer but will not lift the truck by themselves. Front shocks will lift the truck be themselves.
    90. I have a rough country rcx 6inch lift and want to replace my front with these. Now does this due away with the big spacer on the fronts or not because I've heard different stories?
    91. 0 votes
      Q I have a rough country rcx 6inch lift and want to replace my front with these. Now does this due ...... Read more answer now
      A Front shocks are height adjustable - they are able to lift the front end up to 2.75'' using stock susension. Also it is not recommended to stack lifts. Not sure about the your lift type . The best way is to compare your old shocks lengths and mountings to ours: FRONT: Extended Length (IN): 21.4 Inch Compressed Length (IN): 15.12 Inch Upper Mounting Style: Pin Lower Mounting Style: Eyelet REAR: Extended Length (IN): 26.73 Inch Compressed Length (IN): 16-3/4 Inch Rod Diameter (IN): 1.81 Inch Upper Mounting Style: Eyelet Lower Mounting Style: Eyelet
    92. I have a pc nitro level kit already installed. Can I use these for a little more lift in front (still looks lower in front) and for better ride via Bilstein shocks?
    93. 0 votes
      Q I have a pc nitro level kit already installed. Can I use these for a little more lift in front (s...... Read more answer now
      A It may be used on some lowest notch adjustments - please be sure not to exceed 3'' of front lift total
    94. Can I use a front 2.5" and rear 1" spring spacer on my 2012 ram1500 4x4?
    95. 0 votes
      Q Can I use a front 2.5" and rear 1" spring spacer on my 2012 ram1500 4x4? answer now
      A Front shocks are height adjustable - they are able to lift the front without spacers. With the rear shocks 1'' lift can be applied
    96. With 2.75 inches of lift would I have to get new upper control arms since the geometry is being changed? If I did not what would happen?
    97. 0 votes
      Q With 2.75 inches of lift would I have to get new upper control arms since the geometry is being c...... Read more answer now
      A You should be ok with stock UCAs at 2.75" of lift
    98. At the max height setting, what is the biggest tire I could fit on a '15 ram 1500?
    99. 0 votes
      Q At the max height setting, what is the biggest tire I could fit on a '15 ram 1500? answer now
      A Can't say exactly - we haven't tested it by ourselves. It will vary from truck to truck, and will depdnd on the rims offset and on the springs condition, also on the additional weight carried. Maybe the precise camber castor adjustment will be needed to avoid rubbing if using big wheels.
    100. Works for outdoorsman?
    101. 0 votes
      Q Works for outdoorsman? answer now
      A Yes it will fit Outdoorsman but only 4WD models
    102. Whats the warranty of these 5100 shocks for my 2011 Dodge 1500
    103. 0 votes
      Q Whats the warranty of these 5100 shocks for my 2011 Dodge 1500 answer now
      A Bilstein shocks are under warranty. Signs of misuse or abuse will void your warranty . More info about Bilstein USA Warranty on 5100,5125, and 5150 shocks can be found here: https://www.bilsteinus.com/products/search-service/warranty.html
    104. Are new coil springs(dual rage rear coil) necessary like those that come with the genuine mopar kit?
    105. 0 votes
      Q Are new coil springs(dual rage rear coil) necessary like those that come with the genuine mopar kit? answer now
      A no, front shocks can lift the vehicle by themselves. Rear shocks will not lift the vehicle.
    106. Would this work on my 2017 ram 1500 4wd?
    107. 0 votes
      Q Would this work on my 2017 ram 1500 4wd? answer now
      A Yes
    108. Will these shocks fit my 2014 Ram 1500 2wd? I know they say for 4wd, but I read reviews were guys say they have a Ram 2wd and they put these shocks on their truck.
    109. 0 votes
      Q Will these shocks fit my 2014 Ram 1500 2wd? I know they say for 4wd, but I read reviews were guys...... Read more answer now
      A I've checked the manufacturers catalog - for 2014 Ram 1500 2WD only 4600 serie shocks are recommended. So these shocks may fit, but only in case you have mountings and suspension travel length similar to 4WD
    110. I know with the bilstein level kit you can fit 315/70/17. What size lift would I need to fit 37/12.50/17s?
    111. 0 votes
      Q I know with the bilstein level kit you can fit 315/70/17. What size lift would I need to fit 37/1...... Read more answer now
      A

      Can't tell exactlu - will depend on the rims offset, load carried, castor / chamber adjustments and other parameters. We always recommend test fitment first

      A

      Can't tell exactly - will depend on the rims offset, load carried, castor / chamber adjustments and other parameters. We always recommend test fitment first

    112. Will these fit the 2015 with the ecodiesel?
    113. 0 votes
      Q Will these fit the 2015 with the ecodiesel? answer now
      A If it is a 4WD with a coil spring suspension, yes. This set up will not work with air suspension.
    114. I didn't receive my oem spring seat with my purchase for the front shocks?
    115. 0 votes
      Q I didn't receive my oem spring seat with my purchase for the front shocks? answer now
      A These do not come with it. You need to reuse the stock ones.
    116. How exactly do you adjust the front struts from the 0 to 2.75 inch. I want to put these on 2011 ram so it will bring the front up level with the rear.
    117. 0 votes
      Q How exactly do you adjust the front struts from the 0 to 2.75 inch. I want to put these on 2011 r...... Read more answer now
      A You adjust the front shocks with a "C-ring" you snap it on to desired lift positions before you assemble the coilover. Usually RAMs and other trucks have their rear end siiting slightly higher, then their front. Such kit will make the truck look like leveled, when the rear was higher then front before this lit. If you want bigger rear lift - you can use additional rear spacers (product sku="KC09116BK"). Please keep in mind, that spacers are not recommended in case of towing something heavy or frequent carrying much load on the platform.
    118. do I need the rear coil spacer with the adjustable rear shocks?
    119. 0 votes
      Q do I need the rear coil spacer with the adjustable rear shocks? answer now
      A If you want to keep stock rear height you can go without the spacer, if you want the 1" lift, you need to use the spacer. Rear shocks do not lift the vehicle.
    120. If I do the zone 6" lift will these rear shocks work with it?
    121. 0 votes
      Q If I do the zone 6" lift will these rear shocks work with it? answer now
      A No, these shocks wont work, we do not have anything from Bilstein brand that would fit that lift.

    Send me a notification for each new answer.

    -

    $468.79

    More than 30 available

    More than 30 available

    1-3 Day Transit Time